+38 (044) 362 44 94
+38 (098) 405 03 96
 
 

The Model UV232A Kit is used to send high resolution video, Audio (L+R Mixed) and uni-directional RS-232 over a single twisted-pair cable to a remote location up to 500 feet away.
The input video can be from a RGBHV (PC video to WUXGA) or YPbPr (HD analog component to 1080p).
DDC compliant EDID emulation assures proper PC boot-up with video output.
The Uni-directional RS-232 can be used to control LCD's or Projectors that have RS-232 control.
Applications include kiosk solutions, conference halls, digital signage, interactive operator systems, factory or laboratory data acquisition and control, and more.
When the Sender is powered from a VESA compliant VGA source (+5v on Pin 9) a power supply (included) is only required at the Receiver. If the source is not VESA compliant in that regard, or if the video is YPbPr (using a 3 RCA to HD15 input cable), then a power supply (included) is needed at both Sender and Receiver.
The kit includes a local unit (Sender) that includes a VGA & serial cables, plus a remote unit (Receiver) with two power supplies.
It is recommended that for best image quality low-skew UTP cables be utilized (such as Hall Research's Zero-Skew cables), otherwise at long distances (>200ft) and high-resolutions, RGB skew may be present and a separate skew corrector would be necessary (HRT Model SKU-RGB).

Features

  • Sends PC or HD video, Audio (L+R Mixed) and Uni-directional RS-232 over single CATx
  • Wide bandwidth to transmit WUXGA signals (1920x1200 / 60hz) or HD Analog Component (1080p)
  • Compensation for UTP cable to 500 ft
  • No power supply required for local unit - when powered from VESA compliant VGA Source
  • DDC compliant EDID emulation on the Sender
  • Supports all baud rates to 115 Kbps
  • Perfect for Kiosk, or Projector Control applications
  • RS-232 and high quality VGA input cables provided
  • Compact metal enclosure with mounting provisions
  • Compact, Rugged, Reliable, and Economical
  • Made in USA

Specifications

  • Standards: Analog VGA Video (RGBHV), YPbPr, or RGB signals with sync-on-green.
  • Resolutions: All up to WUXGA (1920x1200 / 60Hz), 1080p
  • Video Level: 0.7 v p-p on RGB, 5v p-p H/V sync
  • Bandwidth: 20 Hz to 450 MHz
  • Common Mode Noise Rejection: 100 dB @ 60 Hz, 70 dB @ 1 MHz, 50 db @ 10 MHz
  • Max Distance: Up to 500 ft. (152 meters) based on resolution
  • Temperature: Operating: 32 to 122 Deg F (0 to 50 Deg C);
    Storage: -40 to +185 Deg F (-40 to +85 Deg C)
  • Enclosure: Aluminum
  • MTBF: 100,000 hours (calculated estimate)
  • Power: Via the included power adapter. Voltage: 6v DC Center-Positive. Average Power Consumption: 200mA (Sender) 160mA (Receiver)
  • Size (H x W x D): 1.25 H x 2.75 W x 3.08 D* Each Device
    *Units have 2 mounting ears that protrude 0.40 beyond the main box on each side.
  • RS232 Connections: Pin 2 = RX
    Pin 3 = TX
    Pin 5 = GND
Atlona DVI, RS232, IR and Audio Receiver module over a single Multi Mode Fiber with HDCP and EDID Support
ATLONA VGA TO HDMI CONVERTER/SCALER WITH VGA LOOP OUT
8M (25FT) PLENUM DVI-D (DUAL LINK) CABLE M/M
Gefen DisplayPort Super Booster Cable EXT-DPSB-75
Atlona DVI, RS232, IR and Audio Receiver module over a single Multi Mode Fiber with HDCP and EDID Support ATLONA VGA TO HDMI CONVERTER/SCALER WITH VGA LOOP OUT 8M (25FT) PLENUM DVI-D (DUAL LINK) CABLE M/M Gefen DisplayPort Super Booster Cable EXT-DPSB-75
 
Gefen HDIM, RS232, IR Fiber Optic Extender 1000ft EXT-HDMI1.3-1FO
GEFEN HDSDI TO DVI SCALER BOX
Dual Link DVI Extender over Fiber
2x8 HDMI 1.3 Extender/Splitter over CAT5 Distribution Amplifier
Gefen HDIM, RS232, IR Fiber Optic Extender 1000ft EXT-HDMI1.3-1FO GEFEN HDSDI TO DVI SCALER BOX Dual Link DVI Extender over Fiber 2x8 HDMI 1.3 Extender/Splitter over CAT5 Distribution Amplifier
 
17in LCD KVM Drawer With Touch Pad 23.6in deep
17in LCD KVM Drawer With Touch Pad 23.6in deep